Translate

2024年3月30日星期六

perkins 2806F-E18TA Industrial Engine Diesel Exhaust Pump Installation Guide

This article introduces the installation of diesel exhaust pump for 2806F-E18TA industrial engine

    

Perkins EST Diagnostic Adapter-High Quality

NOTICE
Care  must  be taken to ensure that fluids are con- tained  during  performance  of  inspection,  mainte- nance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable contain- ers  before opening any compartment or disassem- bling any component containing fluids.
Dispose  of all fluids  according  to  local  regulations and mandates.

NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.

1. Ensure that all components are clean and free

from wear and damage. If necessary, replace any components that are worn or damaged.


   2. If necessary, install a new filter (28) (not shown). Refer to Operation and Maintenance Manual,

 Diesel Emission Fluid (DEF) Filter - Clean/ Replace” for the correct procedure.

3. Position diesel exhaust fluid pump (26) onto bracket (27).

4. Install bolts (25) to diesel exhaust fluid pump (26). Support the weight of the diesel exhaust fluid

pump as the bolts are installed.

5. Tighten bolts (25) to a torque of 19 N·m  ( 168 lb in)

 2023A& 2022A Perkins EST Electronic Service Tool Diagnostic Software Full Provide Installation Service


  6. Remove cap from connection on the diesel

exhaust fluid pump.

7. Install manifold (23) to the diesel exhaust fluid

pump.

8. Install bolts (24) to manifold (23) finger tight.

9.Apply Tooling (B) to a new O-ring seal (21) (not  shown) and a new O-ring seal (22) (not shown).

10. Position cap (20) onto manifold (23). Ensure that the cap is correctly installed onto the connection   on the diesel exhaust fluid pump.

11. Install Allen head bolts ( 19) to cap (20) finger tight.

12. Tighten Allen head bolts (19) to a torque of

10 N·m  (89 lb in).

13. Tighten bolts (24) to a torque of 4 N·m  (35 lb in).

 


  14. Position bracket ( 16) onto the bracket for diesel exhaust fluid pump.

15. Install bolts ( 12), bolts (15), and bolts (17) to

bracket (16). Tighten the bolts to a torque of 4 N·m (35 lb in).

16. Connected harness assembly (17) to the diesel exhaust fluid pump.

17. Position bracket ( 13) onto bracket (16). Install bolt (14) Tighten the bolt to a torque of 4 N·m    (35 lb in).

 


 18. Remove the plugs and caps from the connections and the diesel exhaust fluid line. Install diesel

exhaust fluid line (1). Refer toDisassembly and   Assembly, “Diesel Exhaust Fluid Lines - Remove and Install” for the correct procedure.

19. Remove the plugs and caps from the connections and the diesel exhaust fluid line. Install diesel

exhaust fluid line (6). Refer toDisassembly and   Assembly, “Diesel Exhaust Fluid Lines - Remove and Install” for the correct procedure.

20. Remove the plugs and caps from the connection and the diesel exhaust fluid line. Install the diesel  exhaust fluid line to connection (11). Refer to

Disassembly and Assembly, “Diesel Exhaust Fluid Lines - Remove and Installfor the correct

procedure.

21. Connect hose assembly (3) to manifold DEF

heater and connection (4) (not shown) and the

diesel exhaust fluid pump. Tighten hose clamp (2) securely.

22. Connect hose assembly (8) to manifold DEF

heater and the diesel exhaust fluid pump. Tighten hose clamp (7) and hose clamp (9) securely.

23. Connect the hose assembly to connection (5). Tighten the hose clamp securely. Refer to the    OEM for the correct procedure.

 Perkins SPI2 Version 2018A Service & Parts Catalogue Software

24. Install solenoid valve ( 10). Refer toDisassembly and Assembly, “Solenoid Valve (DEF Heater

Coolant) - Remove and Installfor the correct procedure.

25. Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, “Cooling  System Coolant - Check” and Operation and

Maintenance Manual, “Cooling System Coolant - Change” for the correct filling procedure.

26. Turn the battery disconnect switch to the ON position.

   

How to relieve hydraulic pressure in the hydraulic circuit of a CAT excavator.

  How to relieve hydraulic pressure in the hydraulic circuit of 312D2 and 313D2 excavators   Steps to relieve pressure:   Caterpillar ET 202...