How to remove the rear steering label axle from a Scania 4 Series truck

 

IMPORTANT! Handle empty accumulator tanks in compliance with local regulations.

 

12.2025 Scania SDP3 2.68.2 Diagnosis & Programming Truck Software Download and Installation

Relieving the pressure

1   Close the return valve. Unscrew the pressure limiting valve.

 

 

 

2   Connect the return hose from the filling

equipment return connection to the union marked Y/Z or L3/L4 on the accumulator as illustrated.

 

  Scania VCI3 Diagnostic Tool for Scania Trucks Full Chips High Quality

 

3   Open the return valve on the filling

equipment. The oil will now be returned to the filling equipment tank.

4   Oil can be drained from the pipe using

compressed air. The connections on the

master cylinder and centering cylinder must then be undone.

5   Remove the protective cap on the gas side of the accumulator tank.

6   Undo the plug on the gas side max 2 turns and allow the gas to seep out.

7   Remove the plug completely

 

 

1 Protective cap

2 Plug