This article explains how to inspect and clean the engine air filter element on a John Deere 100 Series tractor (LA125)
1. Park machine safely. (See Parking Safely in the SAFETY section.)
2. Let engine cool.
3. Lift hood.
4. Clean dirt and debris from the air cleaner cover.
5. Loosen two knobs (A) and remove cover (B).
IMPORTANT: Avoid damage! Dirt and debris can enter the engine
through a damaged filter element:
• Do not wash paper element.
• Do not attempt to clean paper element by tapping against
another object.
• Do not use pressurized air to clean element.
• Replace element only if it is very dirty, damaged or the seal is
cracked.
6. Pull filter assembly from air cleaner base (C). Inspect the foam
precleaner (D) without removing it. If the foam precleaner is dirty:
a.Remove it from the paper filter carefully.
b.Wash precleaner in a solution of warm water and liquid detergent. Do
not use oil.
c.Rinse precleaner thoroughly. Squeeze out excess water in a dry cloth
until precleaner is completely dry.
7. Inspect the paper filter element (E). If the paper filter element is
damaged or dirty, replace with new filter.
8. Clean air cleaner base very carefully, preventing any dirt from falling into
carburetor.
9. Install foam precleaner on paper filter element.
10. Install new filter assembly back onto air cleaner base.
11. Install air cleaner cover and tighten two knobs.
12. Lower hood.
没有评论:
发表评论