Perkins 2806F-E18TA industrial engine diesel DEF injector disassembly guide

This article introduces the Perkins 2806F-E18TA industrial engine diesel DEF injector disassembly instructions
2023A& 2022A Perkins EST Electronic Service Tool Diagnostic Software Full Provide Installation Service
Removal Procedure



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

NOTICE
Care must be taken to ensure that fluids are con- tained during performance of inspection, mainte- nance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable contain- ers before opening any compartment or disassem- bling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.

1. Turn the battery disconnect switch to the OFF position.

2. Drain the coolant from the cooling system into a

suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, “Cooling System Coolant - Change” for the correct draining procedure.

Perkins Engine ECM ECU Flash Files Collection Download

3. Remove the Diesel Emission Fluid (DEF) line from the Diesel Emission Fluid (DEF) injector. Refer to Disassembly and Assembly, “Diesel Exhaust Fluid Lines - Remove and Install” for the correct

procedure.

Typical example
4. Disconnect harness assembly (2) from DEF
injector (1). Cap the harness assembly.
5. Use Tooling (B) to plug connection on DEF injector ( 1).
6. Disconnect hose assemblies (3) from DEF injector ( 1). Use Tooling (A) to cap hose assemblies (3)
and DEF injector (1).

Perkins EST Diagnostic Adapter-High Quality

Typical example

7. Remove bolts (4) and washers (5) from DEF injector (1).

8. Remove DEF injector (1) and gasket (6) from the Clean Emission Module (CEM). Use a suitable

plug to plug the CEM.

9. Remove seal (7) from DEF injector (1).