Bobcat STEERING LEVERS Removal and Installation Guide

                              Bobcat 741_742_742B_743_743B_743DS STEERING LEVERS
Removal and Installation guide

2022 Bobcat Service Analyzer Diagnostic Software 90.00

NOTE:      Early production machines used 3-piece assembly.
Current production machines use 1-piece shield which
must be removed as a unit.
Remove the front panel

Remove the bolts and remove both side shields 00.

Remove the bolts from the steering lever shield (g & [Q].

Remove the steering linkage at the steering levers

Disconnect the auxiliary linkage from the right steering lever
lID

Remove the bolts (Item 1) from the pivot bearings 'Cl.
Installation: Tighten the bolts to 25-28 ft.-Ibs. (34-38 Nm)
torque.

2022 Bobcat Service Analyzer Diagnostic Software 90.00

 

Remove the steering lever assembly @.

Repairing the Steering Levers
Remove the rubber bushing and the Teflon bushing from the
steering levers.
Install the new rubber bushings into the steering levers using
two sockets and a vise ~l

2022 Bobcat Service Analyzer Diagnostic Software 90.00

 

Install the Teflon bushings on the steering levers [!!).

Install the two steering lever assemblies together ~.
Check the pivot bearings and replace as needed.