How to change the differential oil in the hydraulic system of a JCB excavator loader

 AWARNING

10.2026 JCB ServiceMaster 4 v26.3.2 Diagnostic Software with SW Files Download and installatiom 
Make the machine safe before getting beneath it. Lower
the attachments to the ground; engage the parking
brake; remove the starter key, disconnect the battery.
1
Park the machine on level ground. Engage the parking
brake.Set the transmission to neutral. Lower the
attachments to the ground. Stop the engine and
remove the starter key.
2
Place a container of suitable size beneath plug B to
catch the oil. Remove the drain plug B and its seal.
Allow oil to drain out. The drain plug is magnetic. Wipe
it clean. (Metallic particlesshould be carefully
removed). Fit drain plug B and its washer. Tighten to
79 Nm (60 Ibf ft).
3
Fill with recommended oil through fill/level hole A.
Clean and refit plug A and its seai. Tighten to 79 Nm
(60 Ibf ft).

 JCB ServiceMaster/WinEEM4 KG v2 Keygen 

 

 

 

 

JCB Electronic Service Tool Diagnostic Kit High Quality