How to remove the ZF Transmatic manual transmission from a Scania truck

 1   Remove the noise shield.

 

Scania VCI3 Diagnostic Tool for Scania Trucks Full Chips High Quality

 

Note: The oil can run onto the exhaust pipe on vehicles with left-hand mounted exhaust outlet. Form a piece of metal plate to guide the fluid  past the exhaust pipe and into a receptacle.

 

2   Remove the drain plug and level plug. Let the oil run out.

3   Remove the filter.

 

 

 

1 Level plug

2 Drain plug

3 Filter

  

(11.2025)Scania SDP3 2.68.1 Diagnosis & Programming Truck Software Download and Installation

4  Remove the three drain plugs. Let the oil run out.

 

 

 

 

 

 5 Remove the filter in the filter housing.

 

 

6  Remove retaining ring 1, washer 2 and O-ring 3.

  7 Remove the taper nut 4. Turn the torque converter and allow the oil to drain.

 

 11.2025 Scania SDP3 2.68.1 Marine & Industry Diagnostic Software Download and Installation