Scania VCI3 Diagnostic Tool for Scania Trucks Full Chips High Quality

Beware of hot oil after driving. Wear protective gloves and goggles.

(11.2025)Scania SDP3 2.68.1 Diagnosis & Programming Truck Software Download and Installation

Oil

1 Rotate the flywheel with the turning tool

99 309 to access the drain plug in the torque converter cover through the opening in the flywheel housing.

2 Remove the blanking piece on the bottom of the flywheel housing so that the oil can run out.

3 Remove the drain plug (10 mm internal

hexagon) in the bottom of the filter housing. Let the oil run out.

4 Remove the drain plug (6 mm internal

hexagon) in the cover for the torque

converter with gear-changing clutch. Let the oil run out.