How to remove the safety belt with belt pretensioner from a Scania truck

                                                     WARNING!

 

Scania VCI3 Diagnostic Tool for Scania Trucks Full Chips High Quality

 

Cut the power to the vehicle before starting work.

The belt pretensioner contains an

explosive charge. Do not perform any

other work besides that described here.

Carry the belt pretensioner with the

mouth of the detonator pipe pointing downwards. Do not hold your fingers over the detonator pipe or on the wire rope.

The belt pretensioner must be handled and stored in compliance with local

regulations.

1   Push the upper part of the backrest forward as far as it will go.

2   Remove the screws from the seat lever.

3   Remove the remaining screws holding the casings in position.

 

 

                    

4   Remove the belt guide including screws.

5   Fold away the upholstery.

6   Disconnect the cable harness under the belt pretensioner.

7   Remove the screws.

8   Remove the inertia reel and detonator pipe.

 

(11.2025)Scania SDP3 2.68.1 Diagnosis & Programming Truck Software Download and Installation

IMPORTANT! Handle and store the belt pretensioner in compliance with local

regulations.