How to change the oil in a DFP2012/DFP1013 Deutz diesel engine?

                 

                              Use caution when draining hot oil: Risk of scalding!

                               

2024 Deutz SerDia 4.0 SerDia2010 14.1.9.3 Highest Level 6 Diagnostic Software

                                                 

 Collect the oil in a container. Do not allow the drained oil to run into the soil.
Dispose of the oil in accordance with environmental regulations.

 To change the oil, please follow the steps below:

 

          

 

 1.
Allow the engine to warm up2.
Lube.oil.temperature.should.be.approximately.80.degrees.Ca.
Switch the engine off

Deutz Diagnostic Tool Communicator for Deutz Engine DECOM Controllers

4 Place an oil tray under the engine

5 Unscrew the oil drain plug

 6 Drain the oil

7 Fit.the.oil.drain.plug.with.a.new.seal.ring.and.tighten.firmly.(for.torque,.see.section.8.4.1.7.
– 8.4.2) 

8 Pour in fresh lube oil 

   a  For grade / viscosity information see section 4.1 

   b  For quantity information see section 8.1

9  Check the oil level, see section 6.1.2