Translate

2024年1月13日星期六

How to Disassemble the Exhaust Manifold and Intake Manifold of Cummins M11 Series Engine

 This Article explains how to disassemble the exhaust manifold and intake manifold of a Cummins M11 series engine.

 

① The exhaust manifold assembly consists of three sections. When disassembling, remove a bolt from 

the end of each section and then install two guide pins. (Part No. 3376488), remove the remaining bolts, 

and then remove the exhaust manifold, see Figure 2-25. 

Cummings INLINE 6 Diagnostic Adapter for Heavy Duty Truck High Quality 

 

     

  ② Remove the intake manifold pressure sensor and temperature sensor wire connectors from the 

intake manifold, see Figure 2-26. 

 Cummings Insite 8.7/8.9.2 Pro Diagnostic Software( Support Calibration Online) Download and Installation

 ③ Remove the intake manifold joint and gasket from the top of the intake manifold, remove the two 

mounting bolts, and install the two guide pins (Part No. 3376488), remove the remaining bolts, and 

install the lifting frame to the rocker arm chamber shell with 4 M10 × 25 bolts. The tightening torque is

 47N·m, see Figure 2-27.

没有评论:

发表评论

How to relieve hydraulic pressure in the hydraulic circuit of a CAT excavator.

  How to relieve hydraulic pressure in the hydraulic circuit of 312D2 and 313D2 excavators   Steps to relieve pressure:   Caterpillar ET 202...