Introduces Perkins 2806F Engine Solenoid Valve(Exhaust Balance)-Remove

 This article mainly introduces Perkins 2806F Engine Solenoid Valve(Exhaust
Balance)-Remove

Perkins Engine ECM Flash File Download

1. Disconnect harness assembly(1) from harness assembly(2).
2. Disconnect tube assembly(4) from balance valve
(5).
3. Remove bolt (4) and bolt (8) for tube assembly (7).
4. Disconnect tube assembly(7) from balance valve
(5).
5. Remove bolt (6) from balance valve(5). Remove the balance valve from the bracket.

6. If necessary, follow Step 6.a through Step 6.d to disassemble balance valve(5).
a. Place the assembly of balance valve(5) in a suitable support.
b. Make temporary marks on elbow connection
(14) and balance valve(5) for installation purposes.
C. Loosen lock nut(13) and remove elbow connection(14) balance valve(5). RemoveO-
ring seal(12).
d. Remove adapter(10) from balance valve(5).
Remove O-ring seal(11).

Perkins EST Electronic Service Tool Diagnostic Software Full Function 2020a

7. If necessary, follow Step 7.a through Step 7.b to remove tube assembly(4).
a. Remove bolt (16) from the tube clip for tube assembly(4).
b. Disconnect tube assembly(4) from adapter
(15). Remove the tube assembly.

Perkins SPI2 VERSION 2018A Service & Parts CATALOGUE

8. Ifnecessary, follow Step 8.a through Step 8. cto remove tube assembly(7).
a. Remove bolt(17) and bolt (18) from the tube clip for tube assembly(7). Ensure that the tube clips are not damaged as the bolts are removed.
b. Disconnect tube nut(20) for tube assembly(7)
from waste gate actuator(19).
c. Remove tube assembly(7).