Doosan Transmission Part of The Input Shaft is Preinstalled

 This article introduces how to install the input shaft of doosan transmission

 1. Cool the input shaft (about -80°C (-112°F)), heat gear
(about +120°C (+248°F)) and assemble it until contact is

obtained

BENZ  DTS MONACO 8.16+DATABASE

• 

2. Attach gear axially using retaining ring.

(S) Set of external pliers - 5870 900 015

3. Squeeze snap ring into the recess of the turbine shaft

4. Install turbine shaft until the snap ring snaps into the

BMW E-sys Scripts Collection for New Features

recess of the input shaft - turbine shaft is axially fixed.


5. Press both inner bearing races against shoulder.

6. Install ball bearing.

7. Squeeze rectangular ring (Figure 238) in and hook it in.

8. Insert output shaft into the housing bore until contact is
obtained. 

BMW E-sysPlus 3.8+4.33.31 PsdZdata Lite