How to use Diagnostic Tool Manager

 This article describes How to use Diagnostic Tool Manager

04. 2025 CNH eTimGo Offline Repair Manual full brand download and installtion

 The Diagnostic Tool Manager is used for downloading and installing EST updates, EST releases (installation disc), eTIM GO content, and other updates. This utility checks for updates automatically in the background and can optionally download updates for EST and eTIM GO content automatically. NOTE: EST Updates are downloaded automatically, but must be installed manually. The System Tray icon gives the status of EST updates. In addition, a popup notification appears with a brief explanation.

 

How to install new series

 CASE New Holland Electronic Service Tools (CNH EST v9.12 or v9.11) Engineering Diagnostic Software

 

  Installation from hard drive: 

   Select Data Source : “Install eTIM Data from DVD / Memory Device”

 Select the hard drive of eTIM data

 Click on your Brand logo

Installation from repository:  

 Select Data source: “Install eTIM Data from repository”

 Click on your Brand logo

Selection of series to be installed

 CNH DPA5 Adapter New Holland Heavy Duty mechanical Diagnostic Tool – High Quality Full Chips

           

Disassembly of Perkins 2806F-E18TA Industrial Engine

 This article describes how to disassemble a Perkins 2806F-E18TA Industrial Engine

Perkins EST Diagnostic Adapter-High Quality

Fuel Priming Pump - Remove

and Install

Removal Procedure

1. Turn the fuel supply to the OFF position. 

 

2. Turn the battery disconnect switch to the OFF

position. 

 

3. For the correct location of the fuel priming pump

assembly. Refer to Original Equipment

Manufacturer (OEM) for the correct location.

 

 

 

 

 2024A &2023A Perkins EST Electronic Service Tool Diagnostic Software Full Provide Installation Service

 

4. Remove fuel filter (9). Refer to Operation and

Maintenance Manual, Fuel System Primary Filter

(Water Separator) Element - Replace for the

correct procedure. 

 

5. Disconnect harness assembly (2), harness

assembly (3), and harness assembly (8).

 

6. Disconnect the OEM hose assemblies from the

connections (4) and connection (4a). Plug and cap

the connections and the hose assemblies.

Note: Make temporary marks on the hose

assemblies for installation purposes. 

 

7. Remove bolts (6) and washers (5) from fuel

priming pump base (1). Remove the assembly of

the fuel priming pump base. Support the weight of

the fuel priming pump base as the bolts are

removed.

 

v>

8. If necessary, follow Step 8.a through Step 8.c to

remove mounts (13), mounts (10), limiters (16),

limiter (11), and bracket (14) from fuel filter base

(1).

a. Remove mounts (13) from bracket (14).

Remove the bracket. 

 

b. Remove limiters (16) and mounts (17) and

mounts (15) from fuel priming pump (1).

 

c. Remove mount (10), limiter (11) and mount (12)

from fuel priming pump (1)

 

 

 

 

Perkins Engine ECM ECU Flash Files Collection Download

9. If necessary, follow Step 9.a through Step 9.j to

disassemble the assembly of fuel filter base (1). 

 

a. Place the assembly of fuel filter base (1) in a

suitable support. 

 

b. Remove nut (21) and remove solenoid (22). 

 

c. Use a deep socket to remove valve (23).

Remove O-ring seal (24), O-ring seal (25), and

backing ring (26). 

 

d. Remove check valve (35). Remove O-ring seal

(30), O-ring seal (29), and backing ring (28) 

 

e. Remove bolts (27) from manifold (34). Remove

O-ring seal (33). 

 

f. Remove O-ring seal (19) and backing ring (20).

g. Make temporary marks on wiring harness (37)

for installation purposes. Remove locking nuts

(32). Remove electronic filter (31) and

disconnect the wiring harness from pump

assembly (43). 

 

h. Remove pump assembly (43) from fuel filter

base (1). Remove backing ring (40), seal (41),

backing ring (42), and seal (39). 

 

i. If necessary, remove circlip (36) and remove

wiring harness (37) from fuel filter base (1).

 

Remove O-ring seals (38). 

 

j. If necessary, remove plug (48) from fuel filter

base (1). Remove O-ring seal (47). Remove

spring (46), valve (45), and O-ring seal (44). 

 

If necessary, repeat Step 9.j to remove

remaining valve assembly (49).

Perkins SPI2 Version 2018A Service & Parts Catalogue Software