How to remove xenon headlights from a Scania truck

 

                                                     WARNING!

Lethal voltage. Power to the bulb must be turned off when renewing.

Disconnect the electrical connection

from the the bulb unit. Do not touch the bulb with your fingers.

Wait for at least 3 minutes after

switching off the xenon lamp before you start working. The pressure inside the

bulb remains high for a while after the lamp has been switched off, and the

bulb may explode if not handled with care.

  

Scania VCI3 Diagnostic Tool for Scania Trucks Full Chips High Quality

 

1   Undo the four screws in the headlamp unit.

2   Fold down the wiper arm and take out the headlamp.

3   Unscrew the two screws holding the cover inside the lamp unit.

4   Turn the insulator counterclockwise and remove it from the bulb.

5   Remove the spring holding the bulb, and remove the bulb.

 

(11.2025)Scania SDP3 2.68.1 Diagnosis & Programming Truck Software Download and Installation

 

 

 

 

 

 

 

 

 1 Cover inside the lamp uni

 2 Insulator