How to replace Deutz engine oil filter DFP2012 / DFP1013

 Please.follow.the.steps.below.to.change.the.oil.filter:

 

Deutz Diagnostic Tool Communicator for Deutz Engine DECOM Controllers

                                                                    Risk of scalding!       

                                             

 

   1Then.unscrew.the.lube.oil.filter.cartridge.using.a.commercial.tool.and.spin.it.off.

                               

2024 Deutz SerDia 4.0 SerDia2010 14.1.9.3 Highest Level 6 Diagnostic Software

           

 

2 Catch any oil that may spill out.

 

3 Clean.any.dirt.from.the.filter.carrier.sealing.surface

4 Lightly oil the rubber gasket of the new cartridge

5

5  Manually.screw.in.the.new.cartridge.until.the.gasket.is.flush.
 

6 Tighten.the.lube.oil.filter.cartridge.with.another.half-turn.by.hand

7 Check the oil level, see section 6.1.2

8 Start the engine 

9 Check the oil pressure, see section 3.3.2 

          10 Check.the.lube.oil.filter.cartridge.seal.for.leaks.. 

                          11 Shut down the engine and wait a minimum of 5 minutes 

12 Check the oil level, see section 6.1.2